mpls te auto-frr (MPLS view)

Function

The mpls te auto-frr command globally enables the TE Auto FRR function.

The undo mpls te auto-frr command globally disables the TE Auto FRR function.

TE Auto FRR is disabled by default.

Format

mpls te auto-frr

undo mpls te auto-frr

Parameters

None

Views

MPLS view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the mpls te auto-frr command to globally enable the TE Auto FRR function.

Precautions

After the TE Auto FRR function is enabled globally, all MPLS TE-enabled interfaces use node protection by default.

If TE Auto FRR is enabled globally, all interfaces that are enabled with MPLS TE on the device are automatically configured with the mpls te auto-frr default command by default. To disable TE Auto FRR on certain interfaces, run the mpls te auto-frr block command on these interfaces.

Example

# Enable the TE Auto FRR function.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] mpls te auto-frr

# Disable the TE Auto FRR function.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] undo mpls te auto-frr