< Home

mpls te protect-switch manual (upgrade-compatible command)

Function

The mpls te protect-switch manual command sends a manual switchover request to a specified tunnel.

By default, no manual switching request for a specified tunnel is configured.

Format

mpls te protect-switch manual [ work-lsp | protect-lsp ]

Parameters

Parameter Description Value
work-lsp Switches traffic manually to the primary tunnel. -
protect-lsp Switches traffic manually to a protection tunnel. -

Views

Tunnel interface view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After an upgrade, this command is no longer supported, and it is replaced by the mpls te protect-switch manual command.

Parent Topic: MPLS compatible command
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >