msdp

Function

The msdp command enables MSDP and displays the MSDP view in the public network instance or the VPN instance.

The undo msdp command clears all configurations in the MSDP view, releases the resources occupied by MSDP, and restores the initial state.

By default, MSDP is disabled.

Format

msdp [ vpn-instance vpn-instance-name ]

undo msdp [ vpn-instance vpn-instance-name ]

Parameters

Parameter	Description	Value
vpn-instance vpn-instance-name	Specifies a VPN instance. vpn-instance-name specifies the name of the VPN instance.	The value must be an existing VPN instance name.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To configure MSDP, you can run the msdp command to enable MSDP and display the MSDP view. All the configurations related to MSDP peers must be done in the MSDP view.

Prerequisites

The multicast routing function has been enabled using the multicast routing-enable command.

Configuration Impact

Running the undo msdp command interrupts MSDP services. Therefore, use this command with caution.

Example

# Enable MSDP and enter the MSDP view.

<HUAWEI> system-view
[HUAWEI] multicast routing-enable
[HUAWEI] msdp
[HUAWEI-msdp]