mu-mimo optimize enable

Function

The mu-mimo optimize enable command enables the MU-MIMO optimization function.

The undo mu-mimo optimize enable command disables the MU-MIMO optimization function.

By default, the MU-MIMO optimization function is disabled.

Format

mu-mimo optimize enable

undo mu-mimo optimize enable

Parameters

None

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In an environment with less interference, you can run the mu-mimo optimize enable command to enable the MU-MIMO optimization function to meet requirements for high downlink throughput of the AP. The expected effect may fail to be achieved in some scenarios.

Prerequisites

The MU-MIMO function has been enabled using the undo mu-mimo disable command.

Example

# Enable the MU-MIMO optimization function in the SSID profile test.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name test
[HUAWEI-wlan-ssid-prof-test] undo mu-mimo disable
[HUAWEI-wlan-ssid-prof-test] mu-mimo optimize enable