multicast-list

Function

The multicast-list command creates a multicast group list.

The undo multicast-list command deletes a multicast group list.

By default, no multicast group list is configured.

Format

multicast-list list-name

undo multicast-list { list-name | index start-index to end-index | all }

Parameters

Parameter	Description	Value
list-name	Specifies the name of a multicast group list.	The value is a string of 1 to 31 case-insensitive characters without spaces.
index start-index to end-index	Specifies the index of a multicast group list. start-index specifies the start index of a multicast group, and end-index specifies the end index of a multicast group.	The value is an integer that ranges from 1 to 128.
all	Deletes all multicast group lists.	-

Views

BTV view

Default Level

2: Configuration level

Usage Guidelines

A multicast group list is in the middle of the three-level control mechanism for controllable multicast, and is a set of multicast groups. A multicast group list can contain multiple multicast groups. For example, multicast group list L1 contains G1, G2, G3, and G4. A multicast group can be contained in multiple multicast group lists. For example, G3 is contained in L1 and L2. When you configure controllable multicast, you must add the multicast group list to a multicast profile.

Using the multicast-list command, you can create a multicast group list and enter the multicast group list view. If a multicast group list is already created, you can directly enter the multicast group list view.

Example

# Create the multicast group list named list1.

<HUAWEI> system-view
[HUAWEI] btv
[HUAWEI-btv] multicast-list list1
[HUAWEI-btv-list-list1]