multicast ipv6 cpu-forward disable

Function

The multicast ipv6 cpu-forward disable command disables software forwarding for IPv6 multicast packets.

The undo multicast ipv6 cpu-forward disable command restores the default configuration.

By default, software forwarding for IPv6 multicast packets is enabled.

Format

multicast ipv6 cpu-forward disable

undo multicast ipv6 cpu-forward disable

Parameters

None.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In most cases, the switch forwards packets based on software before the hardware forwarding is completed. Then, the switch forwards packets based on hardware. Soft forwarding for multicast packets must be disabled on the switch to prevent packet loss and disorder caused by the low forwarding speed and first packet cache mechanism of soft forwarding.

Prerequisites

IPv6 multicast routing has been enabled using the multicast ipv6 routing-enable command in the system view.

Example

# Disable software forwarding for IPv6 multicast packets.

<HUAWEI> system-view
[HUAWEI] multicast ipv6 routing-enable
[HUAWEI] multicast ipv6 cpu-forward disable