The multicast ipv6 invalid-packet command sets the maximum number of invalid IPv6 multicast protocol packets that can be stored on the switch.
The undo multicast ipv6 invalid-packet command deletes the set maximum number of invalid IPv6 multicast protocol packets that can be stored on the switch.
By default, the switch can save a maximum of 10 invalid packets for each specific IPv6 multicast protocol.
multicast ipv6 invalid-packet { mld | pim } max-count max-number
undo multicast ipv6 invalid-packet { mld | pim }
| Parameter | Description | Value |
|---|---|---|
| mld | Sets the maximum number of invalid MLD messages. | - |
| pim | Sets the maximum number of invalid PIM (IPv6) messages. | - |
| max-count max-number | Sets the maximum number of invalid IPv6 multicast protocol packets that can be stored on a device. | The value is an integer that ranges from 1 to 100. |
If IPv6 multicast entries fail to be generated or peer relationships fail to be set up, you can enable the switch to store invalid IPv6 multicast protocol packets and view statistics and details of the invalid IPv6 multicast protocol packets. Based on the command output, you can locate and rectify faults.