multicast mib-notification join-leave frequency

Function

The multicast mib-notification join-leave frequency command sets the maximum number of trap messages sent by the system per second when IGMP/MLD joining or leaving events occur.

The undo multicast mib-notification join-leave frequency command restores the default number of trap messages sent by the system per second when IGMP/MLD joining or leaving events occur.

By default, the system does not send any trap message when IGMP/MLD joining or leaving events occur.

Format

multicast mib-notification join-leave frequency count

undo multicast mib-notification join-leave frequency

Only the S5720-EI, S5720-HI, S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720-LI, S6720S-EI, S6720S-LI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Parameters

Parameter	Description	Value
count	Specifies the maximum number of trap messages sent by the system per second when IGMP/MLD joining or leaving events occur.	The value is an integer that ranges from 0 to 240. The unit is in packets per second. The default value is 0.

Views

Multicast MIB view

Default Level

2: Configuration level

Usage Guidelines

If network administrators need to know which receivers join or leave multicast groups in real time, run this command. The switch will send trap messages after receivers join or leave multicast groups.

Example

# Set the maximum number of trap messages sent by the system per second to 30 when IGMP/MLD joining or leaving events occur.

<HUAWEI> system-view
[HUAWEI] multicast-mib
[HUAWEI-mcast-mib] multicast mib-notification join-leave frequency 30