The name command configures a name for a VLAN.
The undo name command deletes a configured VLAN name.
By default, a VLAN does not have a name.
| Parameter | Description | Value |
|---|---|---|
| vlan-name | Specifies the VLAN name. | The name is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
If a device is configured with multiple VLANs for transmitting different services, you can name the VLANs in their corresponding VLAN views to facilitate service management. In this manner, you can check the deployed services of a VLAN by the VLAN name.
After VLANs are named, you can run the vlan vlan-name command in the system view to enter the view of a specific VLAN, and then check or modify the configuration of the VLAN.