The nd trust port command enables an ND trusted port in a WDS profile.
The undo nd trust port command disables an ND trusted port in a WDS profile.
By default, an ND trusted
port is enabled in a WDS profile.
Format
nd trust port
undo nd trust port
Parameters
None
Views
WDS profile view
Default Level
2: Configuration level
Usage Guidelines
After an ND trusted port is enabled in a WDS profile and the WDS profile is applied to an AP, the AP receives valid ND protocol packets and forwards the packets to STAs or peer APs so that the STAs can obtain valid IPv6
addresses and go online.
Example
# Enable an ND trusted port in the WDS profile test.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test
[HUAWEI-wlan-wds-prof-test] nd trust port