ndp timer aging

Function

The ndp timer aging command configures an aging time for NDP entries on the receiving switch.

The undo ndp timer aging command restores the default aging time of NDP entries on the receiving switch.

By default, the aging time of the NDP entries on the receiving switch is 180 seconds.

Format

ndp timer aging aging-time

undo ndp timer aging

Parameters

Parameter	Description	Value
aging-time	Specifies the aging time of the NDP entries on the receiving switch.	The value is an integer that ranges from 6 to 255, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the receiving switch does not receive NDP packets from a local switch before the aging time of the NDP entry on the receiving switch expires, the receiving switch automatically deletes the neighbor entry corresponding to the local switch.

Prerequisites

NDP has been enabled on the receiving switch.

Precautions

The aging time of the NDP entries on the receiving switch must be greater than the interval for sending NDP packets.

Example

# Set the aging time of NDP entries to 175 seconds.

<HUAWEI> system-view

[HUAWEI] ndp timer aging 175