network-authen-type

Function

The network-authen-type command sets a network authentication type for a Hotspot2.0 profile.

The undo network-authen-type command deletes a network authentication type.

By default, no network authentication type is configured.

Format

network-authen-type { acceptance [ redirect-url url ] | dns-redirection | http-https-redirection redirect-url url | online-enroll }

undo network-authen-type

Parameters

Parameter	Description	Value
acceptance	Indicates acceptance of terms and conditions.	-
redirect-url url	Specifies the redirected URL address.	-
dns-redirection	Indicates DNS redirection.	-
http-https-redirection	Indicates HTTP and HTTPS redirection.	-
online-enroll	Indicates online enrollment.	-

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Beacon and Probe Response frames sent from Hotspot2.0-capable APs carry network parameter information, which helps user terminals to discover and select proper networks. If the network operator requests user terminals to execute specified actions, for example, opening a web page for Portal authentication, the Additional Steps Required for Access (ASRA) field must be set to 1, indicating that user terminals must implement extra authentication when connecting to a network. You can run the network-authen-type command to specify a network authentication type.

Example

# Set the network authentication type to online enrollment in Hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] network-authen-type online-enroll