network (RIP)

Function

The network command enables RIP for the interface on the specified network segment.

The undo network command disables RIP for the interface on the specified network segment.

By default, RIP is disabled for the interface on the specified network segment.

network network-address

undo network network-address

Parameter	Description	Value
network-address	Specifies the network address on which RIP is enabled. It must be the address of the natural network segment.	The value is in dotted decimal notation.

RIP view

2: Configuration level

An interface can be associated with only one RIP process.

# Enable RIP routes for the interface on the specified network segment.

<HUAWEI> system-view
[HUAWEI] rip
[HUAWEI-rip-1] network 10.0.0.0