ospf suppress-flapping peer disable

Function

The ospf suppress-flapping peer disable command disables OSPF neighbor relationship flapping suppression on an interface.

The undo ospf suppress-flapping peer disable command enables OSPF neighbor relationship flapping suppression on an interface.

By default, OSPF neighbor relationship flapping suppression is enabled on all interfaces.

Format

ospf suppress-flapping peer disable

undo ospf suppress-flapping peer disable

Parameters

None

Views

Interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, OSPF neighbor relationship flapping suppression is enabled on all interfaces in the same OSPF process. To disable the function on one of the interfaces, run the ospf suppress-flapping peer disable command.

When an interface enters the flapping suppression state, all neighbor relationships on the interface enter the state accordingly.

Prerequisites

OSPF neighbor relationship flapping suppression must have been enabled globally before you enable the function on an interface using the undo ospf suppress-flapping peer disable command. By default, the function is enabled globally. If it is disabled, run the undo suppress-flapping peer disable command to enable it.

Example

# Disable OSPF neighbor relationship flapping suppression on VLANIF100.

<HUAWEI> system-view

[HUAWEI] interface vlanif 100

[HUAWEI-Vlanif100] ospf suppress-flapping peer disable