outbound recording-scheme

Function

The outbound recording-scheme command applies a policy to a recording scheme to record the connection information.

The undo outbound recording-scheme command deletes a policy from a recording scheme. Connection information is not recorded then.

By default, connection information is not recorded.

Format

outbound recording-scheme recording-scheme-name

undo outbound recording-scheme

Parameters

Parameter	Description	Value
recording-scheme-name	Specifies the name of a recording scheme.	The recording scheme must already exist.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Incorrect connections may result in network faults, for example, loops. The connection information recorded on a server helps you monitor devices. When network faults occur, you can locate faults based on the connection information recorded on the server.

Prerequisites

A recording scheme has been created using the recording-scheme command in the AAA view and an HWTACACS server template has been associated with a recording scheme using the recording-mode hwtacacs command in the recording scheme view.

Example

# Apply a policy to the recording scheme scheme to record the connection information.

<HUAWEI> system-view
[HUAWEI] hwtacacs-server template hw1
[HUAWEI-hwtacacs-hw1] quit
[HUAWEI] aaa
[HUAWEI-aaa] recording-scheme scheme
[HUAWEI-aaa-recording-scheme] recording-mode hwtacacs hw1
[HUAWEI-aaa-recording-scheme] quit
[HUAWEI-aaa] outbound recording-scheme scheme