parity

Function

The parity command sets a parity bit for a user interface.

The undo parity command disables the parity check.

By default, no parity check is configured.

Format

parity { even | mark | none | odd | space }

undo parity

Parameters

Parameter	Description	Value
even	Specifies even parity check.	-
mark	Specifies Mark parity check.	-
none	Specifies no parity check.	-
odd	Specifies odd parity check.	-
space	Specifies Space parity check.	-

Views

User interface view

Default Level

3: Management level

Usage Guidelines

The setting is valid only when the serial port is configured to work in asynchronous mode.

If the parity bit for a user interface cannot be set on a device, the system prompts the message "Error: Failed to run this command because of internal causes of system malfunctions."

Example

# Set the transmission parity bit on the console port to odd parity.

<HUAWEI> system-view

[HUAWEI] user-interface console 0

[HUAWEI-ui-console0] parity odd