The patch configuration-synchronize command synchronizes the patch configuration and patch file of the master switch to other member switches in a stack.
Format
patch configuration-synchronize
Parameters
None
Views
User view
Default Level
3: Management level
Usage Guidelines
After you replace or add a member switch in a stack and start the new member switch, run this command to synchronize the patch configuration and patch file from the master switch if the patch file of the new member switch
is incorrect.
Example
# Run the following commands on the new member switch to synchronize the patch configurations and patch files to the new member switch.
<HUAWEI> patch configuration-synchronize
Info: Finished synchronizing the patch package file and the patch configuration.