peer-address (NQA view)

Function

The peer-address command specifies a peer IP address for an NQA PWE3 ping or trace test instance.

The undo peer-address command restores the default setting.

By default, no peer IP address is specified for an NQA PWE3 ping or trace test instance.

Format

peer-address peer-address

undo peer-address peer-address

Parameters

Parameter	Description	Value
peer-address	Specifies a peer IP address for an NQA PWE3 ping or trace test instance.	The value is in dotted decimal notation.

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

For an NQA PWE3 ping or trace test instance, if the primary and secondary VCs are configured with the same VC ID, the peer-address command must be configured to specify a peer IP address. This configuration determines a unique PW for the NQA test.

Example

# Specify 10.1.1.1 as the peer IP address of an NQA PWE3 ping test instance.

<HUAWEI> system-view
[HUAWEI] nqa test-instance user test
[HUAWEI-nqa-user-test] test-type pwe3ping
[HUAWEI-nqa-user-test] peer-address 10.1.1.1