The poe high-inrush enable command configures an interface to allow generation of the high pulse current during power-on.
The undo poe high-inrush enable command configures an interface not to allow generation of the high pulse current during power-on.
By default, interfaces do not allow generation of the high pulse current during power-on.
Parameter |
Description |
Value |
|---|---|---|
| slot slot-id | Specifies a slot ID. |
The value range depends on the device configuration. |
High inrush current is generated when a non-standard PD is powered on. In this case, the PSE cuts off the power of the PD to protect itself. If the PSE is required to provide power for the PD, the PSE must allow high inrush current. The high inrush current may damage device components.