poe max-power (AP system profile view)

Function

The poe max-power command sets the maximum output power of an AP.

The undo poe max-power command restores the maximum output power of an AP to the default value.

By default, the maximum output power of the AP is the total power that the PoE power supply provides for PDs.

Format

poe max-power max-power

undo poe max-power

Parameters

Parameter	Description	Value
max-power	Specifies the maximum output power of an AP.	The value ranges from 15400 mW to 750000 mW.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, the system automatically obtains the maximum PoE power supported by the AP. You can run the poe max-power command to set the maximum output power to ensure stable PoE power supply when the total power of the AP is insufficient.

Precautions

If the maximum output power that you set is smaller than the total power required by PDs, PDs with lower priority are powered off.

The configured maximum output power must be smaller than the total power that the PoE power supply provides for PDs.

This function is supported only by the AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP8082DN, AP8182DN, AP2050DN-E, AP2051DN-E, R250D-E, R251D-E, AD9431DN-24X, AD9430DN-24, AD9430DN-12.

Example

# Set the maximum output power of an AP to 20000 mW.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] poe max-power 20000