port eth-trunk trunkmember

Function

The port eth-trunk trunkmember command adds member ports to the Eth-Trunk.

The undo port eth-trunk trunkmember command deletes member ports from an Eth-Trunk.

By default, no member ports are added to the Eth-Trunk.

This command can only be executed on a parent switch.

Format

port eth-trunk trunk-id trunkmember interface interface-type interface-number1 [ to interface-number2 ]

undo port eth-trunk trunk-id trunkmember interface interface-type interface-number1 [ to interface-number2 ]

Parameters

Parameter	Description	Value
trunk-id	Specifies the ID of an Eth-Trunk.	The value is an integer and the minimum value is 1. The maximum value varies according to the switch model. For a specific switch model, the maximum value is the same as that described in interface eth-trunk.
interface interface-type interface-number1 [ to interface-number2 ]	Specifies the type and number of the interface added to an Eth-Trunk: interface-type specifies the interface type. interface-number1 specifies the first interface number. interface-number2 specifies the last interface number.	-

Views

AS view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After a downlink fabric port of a level-1 AS is configured using the down-direction fabric-port port-id member-group interface eth-trunk trunk-id command, you need to add member ports to the Eth-Trunk to which the fabric port is bound.

When an Eth-Trunk has been created for an AS using the uni eth-trunk command, you can run the port eth-trunk trunkmember command to add member ports to this Eth-Trunk.

Precautions

AS uplink ports can be used to connect to the parent or level-1 AS or set up a stack and be configured as downlink fabric ports to connect to other ASs.

On the S6720-EI and S6720S-EI, 40GE ports and 10GE ports split from 40GE ports cannot be configured as downlink fabric ports.

Example

# Add member ports to the Eth-Trunk to which a fabric port is bound.

<HUAWEI> system-view
[HUAWEI] uni-mng
[HUAWEI-um] as name as1
[HUAWEI-um-as-as1] down-direction fabric-port 1 member-group interface eth-trunk 1
[HUAWEI-um-as-as1] port eth-trunk 1 trunkmember interface gigabitethernet 0/0/16

# Add member ports to the Eth-Trunk configured on the specified AS.

<HUAWEI> system-view
[HUAWEI] uni-mng
[HUAWEI-um] as name as1
[HUAWEI-um-as-as1] uni eth-trunk 40
[HUAWEI-um-as-as1] port eth-trunk 40 trunkmember interface GigabitEthernet 0/0/10