The port mux-vlan enable command enables the MUX VLAN function on an interface.
The undo port mux-vlan enable command disables the MUX VLAN function on an interface.
By default, the MUX VLAN function is disabled on an interface.
port mux-vlan enable
undo port mux-vlan enable
None
GE interface view, XGE interface view, Eth-Trunk interface view, port group view
2: Configuration level
This command is available to aid upgrade compatibility. It can be run when it is entered in full.
After the upgrade, it is replaced by the port mux-vlan enable vlan command.