portal domain

Function

The portal domain specifies a forcible Portal authentication domain.

The undo portal domain command deletes a forcible Portal authentication domain.

By default, no forcible Portal authentication domain is specified.

Format

portal domain domain-name

undo portal domain

Parameters

Parameter	Description	Value
domain-name	Specifies the forcible Portal authentication domain.	The value is a string of 1 to 64 case-insensitive characters without any space, asterisk (*), question mark (?), or quotation mark (").

Views

GE interface view,MultiGE interface view, XGE interface view, 25GE interface view, 40GE interface view, 100GE interface view, Eth-Trunk interface view, VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

To flexibly deploy access policies for Portal authentication users, the administrator can run the portal domain command to configure a forcible Portal authentication domain.

After a forcible Portal authentication domain is configured on an interface, the device uses the specified authentication domain to authenticate, authorize, and charge Portal authentication users on the interface, ignoring the domain names carried in the user names. The administrator can specify different authentication domains for different interfaces as needed.

The command cannot be run on Layer 2 interfaces.

Example

# Set the forcible Portal authentication domain to abc on VLANIF 10.

<HUAWEI> system-view
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] portal domain abc

# Set the forcible Portal authentication domain to abc on Layer 3 interface GE0/0/1.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo portswitch
[HUAWEI-GigabitEthernet0/0/1] portal domain abc