The portal user-alarm percentage command sets alarm thresholds for the Portal authentication user count percentage.
The undo portal user-alarm percentage command restores the default alarm thresholds for the Portal authentication user count percentage.
By default, the lower alarm threshold for the Portal authentication user count percentage is 50, and the upper alarm threshold for the Portal authentication user count percentage is 100.
portal user-alarm percentage percent-lower-value percent-upper-value
undo portal user-alarm percentage
| Parameter | Description | Value |
|---|---|---|
percent-lower-value |
Specifies the lower alarm threshold for the Portal authentication user count percentage. |
The value is an integer that ranges from 1 to 100. |
percent-upper-value |
Specifies the upper alarm threshold for the Portal authentication user count percentage. |
The value is an integer that ranges from 1 to 100, but must be greater than or equal to the lower alarm threshold. |
After running the portal max-user command to set the maximum number of online Portal authentication users allowed on a device, you can run the portal user-alarm percentage command to set alarm thresholds for the Portal authentication user count percentage.
When the percentage of online Portal authentication users against the maximum number of users allowed by the device exceeds the upper alarm threshold, the device generates an alarm. When the percentage of online Portal authentication users against the maximum number of users allowed by the device reaches or falls below the lower alarm threshold later, the device generates a clear alarm.
If the configured upper alarm threshold for the Portal authentication user count percentage is 100, the device generates an alarm when the number of online users reaches the maximum number of users allowed by the device.