pppoe intermediate-agent information encapsulation

Function

The pppoe intermediate-agent information encapsulation command configures fields added to PPPoE packets.

The undo pppoe intermediate-agent information encapsulation command restores the default fields added to PPPoE packets.

By default, the device adds the circuit-id and remote-id fields to PPPoE packets.

Format

pppoe intermediate-agent information encapsulation { circuit-id | remote-id } ^*

undo pppoe intermediate-agent information encapsulation

Parameters

Parameter	Description	Value
circuit-id	Indicates the circuit ID (CID).	-
remote-id	Indicates the remote ID (RID).	-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After PPPoE+ is enabled, the device adds the circuit-id and remote-id fields to PPPoE packets by default. If the remote non-Huawei PPPoE server can identify only the circuit-id or remote-id field, run the pppoe intermediate-agent information encapsulation command to configure the device only to add the circuit-id or remote-id fields to PPPoE packets.

Prerequisites

The PPPoE+ function has been enabled by running the pppoe intermediate-agent information enable command in the system view.

Example

# Configure the device only to add the circuit-id field to PPPoE packets.

<HUAWEI> system-view
[HUAWEI] pppoe intermediate-agent information enable 
[HUAWEI] pppoe intermediate-agent information encapsulation circuit-id