pppoe intermediate-agent information vendor-id

Function

The pppoe intermediate-agent information vendor-id command sets the vendor ID that the device adds to PPPoE packets.

The undo pppoe intermediate-agent information vendor-id command restores the default vendor ID that the device adds to PPPoE packets.

The default vendor ID that the device adds to PPPoE packets is 2011.

Format

pppoe intermediate-agent information vendor-id vendor-id

undo pppoe intermediate-agent information vendor-id

Parameters

Parameter	Description	Value
vendor-id vendor-id	Specifies a vendor ID added to PPPoE packets.	The value is an integer ranging from 0 to 4294967295. The default value is 2011.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After PPPoE+ is enabled, the device must negotiate with the PPPoE server using PPPoE packets containing the vendor ID. By default, the device adds vendor ID 2011 to PPPoE packets. If the device is connected to a non-Huawei PPPoE server, the vendor ID may not be 2011; for example, the vendor ID is 3561. In this case, run the pppoe intermediate-agent information vendor-id vendor-id command to set the vendor ID to be the same as that in PPPoE packets sent from the non-Huawei PPPoE server.

Prerequisites

PPPoE+ has been enabled globally by running the pppoe intermediate-agent information enable command.

Example

# Set the vendor ID added to PPPoE packets to 3561.

<HUAWEI> system-view
[HUAWEI] pppoe intermediate-agent information enable 
[HUAWEI] pppoe intermediate-agent information vendor-id 3561