priority-map dscp (WDS profile view)

Function

The priority-map dscp command configures the mapping from DSCP priorities to 802.11e user priorities on the WDS air interface.

The undo priority-map dscp command restores the default mapping from DSCP priorities to 802.11e user priorities on the WDS air interface.

Table 1 describes the mapping from DSCP priorities to 802.11e user priorities by default.

**Table 1** Mapping from DSCP priorities to 802.11e user priorities
DSCP Priority	802.11e User Priority
0-7	0
8-15	1
16-23	2
24-31	3
32-39	4
40-47	5
48-55	6
56-63	7

Format

priority-map dscp { dscp-value1 [ to dscp-value2 ] } &<1-10> dot11e dot11e-value

undo priority-map dscp

Parameters

Parameter	Description	Value
dscp dscp-value1	Specifies the DSCP priority of 802.3 packets.	The value is an integer that ranges from 0 to 63. A larger value indicates a higher priority.
to dscp-value2	Specifies the DSCP priority of 802.3 packets.	The value is an integer that ranges from 0 to 63. A larger value indicates a higher priority.
dot11e dot11e-value	Specifies the 802.11e user priority.	The value is an integer that ranges from 0 to 7. A larger value indicates a higher priority.

Views

WDS profile view

Default Level

2: Configuration level

Usage Guidelines

On a WDS network, you can run this command to configure the mapping from DSCP priorities to 802.11e user priorities on the WDS air interface of an AP.

Example

# Map DSCP priorities 0-6 to 802.11e user priority 0 on the WDS air interface.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test
[HUAWEI-wlan-wds-prof-test] priority-map dscp 0 to 6 dot11e 0