priority

Function

The priority command sets the setup priority and holding priority in a CR-LSP attribute template.

The undo priority command restores the default setup priority and holding priority in a CR-LSP attribute template.

The default setup and holding priority for a CR-LSP attribute template are both 7.

priority setup_priority_value [ hold_priority_value ]

undo priority

Parameter	Description	Value
setup_priority_value	Specifies the setup priority value in a CR-LSP attribute template.	An integer ranging from 0 to 7. The smaller the value, the higher the priority. The default setup priority is 7.
hold_priority_value	Specifies the holding priority value in a CR-LSP attribute template.	An integer ranging from 0 to 7. The smaller the value, the higher the priority. The default holding priority is 7.

LSP attribute view

2: Configuration level

When configuring the priority command in the LSP attribute view, ensure that the setup priority is greater than or equal to the holding priority.

# Set both the setup priority and holding priority to 4 in the CR-LSP attribute template.

<HUAWEI> system-view
[HUAWEI] lsp-attribute lsp-attribute-name
[HUAWEI-lsp-attribute-lsp-attribute-name] priority 4 4