qos-profile (service scheme view)

Function

The qos-profile command binds a QoS profile to a service scheme.

The undo qos-profile command unbinds the QoS profile from the service scheme.

By default, no QoS profile is bound to a service scheme.

Only S5720-EI, S5720-HI, S5730-HI, S5731-H,?S5731S-H, S5731-S, S5731S-S, S6720-HI, S5732-H, S6730-H, S6730S-H, S6730-S, S6730S-S, S6720-EI, and S6720S-EI support this command.

Format

qos-profile profile-name

undo qos-profile profile-name

Parameters

Parameter	Description	Value
profile-name	Specifies the name of the QoS profile bound to the service scheme.	The value must be the name of an existing QoS profile.

Views

Service scheme view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After creating a service scheme using the service-scheme command, you can run the qos-profile command to bind a QoS profile to the service scheme. The user assigned with the service scheme will have the attributes in the QoS profile.

Precautions

For S5720-EI, S6720-EI, and S6720S-EI, if the user upstream rate limit is configured in the QoS profile bound to a service scheme, do not configure the device to use the service scheme to grant network access rights to users in the pre-connection phase. Otherwise, users go offline.

Example

# Bind the QoS profile abc to the service scheme huawei.

<HUAWEI> system-view
[HUAWEI] qos-profile name abc
[HUAWEI-qos-abc] quit
[HUAWEI] aaa
[HUAWEI-aaa] service-scheme huawei
[HUAWEI-aaa-service-huawei] qos-profile abc