radio-2g-profile

Function

The radio-2g-profile command binds a 2G radio profile to a 2G radio.

The undo radio-2g-profile command unbinds a 2G radio profile from a 2G radio.

By default, no 2G radio profile is applied in the AP view and AP radio view, but the 2G radio profile default is applied to the AP group view and AP group radio view.

Format

radio-2g-profile profile-name radio { radio-id | all }

undo radio-2g-profile radio { radio-id | all }

radio { radio-id | all } is supported only in the AP group view and AP view.

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a 2G radio profile.	The 2G radio profile must exist.
radio radio-id	Specifies a radio ID.	The value is an integer that is 0 and 2.
radio all	Specifies all radios.	-

Views

AP group view, AP view, AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create a 2G radio profile using the radio-2g-profile (WLAN view) command, bind it to a 2G radio so that the 2G radio profile can take effect.

Precautions

After a 2G radio profile is applied in the AP group view or AP view, the parameter settings in the profile take effect on all 2G radios in the AP group or the 2G radio of the AP.

The configuration in the AP view and AP radio view has a higher priority than that in the AP group view and AP group radio view.

Example

# Create the 2G radio profile radio-profile1 and bind it to AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name radio-profile1
[HUAWEI-wlan-radio-2g-prof-radio-profile1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio-2g-profile radio-profile1 radio 0