radius-attribute nas-ipv6

Function

The radius-attribute nas-ipv6 command sets the NAS-IPv6-Address attribute in a RADIUS packet sent from a network access server (NAS).

The undo radius-attribute nas-ipv6 command deletes the configured NAS-IPv6-Address attribute.

By default, no NAS-IPv6-Address attribute is configured.

Format

radius-attribute nas-ipv6 ipv6-address

undo radius-attribute nas-ipv6

Parameters

Parameter	Description	Value
ipv6-address	Specifies the NAS-IPv6-Address attribute in a RADIUS packet.	The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The RADIUS server uses IP addresses to identify different NASs. The NAS-IPv6-Address attribute in a RADIUS packet can be configured using the radius-attribute nas-ipv6 command in the RADIUS template.

Prerequisites

A RADIUS server template has been created using the radius-server template command.

Precautions

If the RADIUS NAS-IP-Address attribute is set to an invalid IP address, the configuration fails and an error message is displayed.

Example

# Set the RADIUS NAS-IPv6-Address attribute.

<HUAWEI> system-view
[HUAWEI] radius-server template temp1
[HUAWEI-radius-temp1] radius-attribute nas-ipv6 FC00::7