reboot uni-mng

Function

The reboot uni-mng command restarts an SVF system.

This command can only be executed on a parent switch.

reboot uni-mng

None

User view

3: Management level

Usage Scenario

When upgrading or troubleshooting an SVF system, you can restart the SVF system, including the parent and all ASs.

Precautions

This command can be used only after the SVF function is enabled.
The next startup software version of the AS must be V200R011C10 or later, and the next startup software version of the parent cannot be earlier than that of the AS.
Before running this command to restart an SVF system, you must save the configuration of the parent. If an AS is configured in independent mode, you also need to save the configuration of the AS.

# Restart an SVF system.

<HUAWEI> reboot uni-mng