report-mode

Function

The report-mode command sets the mode and interval for APs to send Bluetooth packets.

The undo report-mode command cancels the configured mode and interval for APs to send Bluetooth packets.

By default, an AP sends Bluetooth packets at an interval of 10 seconds.

Format

report-mode { immediate | periodic [ interval interval ] }

undo report-mode

Parameters

Parameter	Description	Value
immediate	Enables APs to send Bluetooth packets immediately.	-
periodic	Enables APs to send Bluetooth packets periodically.	-
interval interval	Specifies an interval at which Bluetooth packets are sent.	The value is an integer that ranges from 1 to 600, in seconds.

Views

BLE profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When APs are enabled to send Bluetooth packets immediately, the location accuracy is high but AP performance may be affected. When APs are enabled to send Bluetooth packets periodically, the location accuracy is low but AP performance is not affected.

Precautions

When APs are enabled to send Bluetooth packets periodically, set a proper interval at which Bluetooth packets are sent. Otherwise, location results may be inaccurate.

Example

# Enable APs to send Bluetooth packets immediately.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei] report-mode immediate