report-sta-info enable

Function

The report-sta-info enable command enables an AC to report information about STA traffic statistics and online duration on APs.

The undo report-sta-info enable command disables an AC from reporting information about STA traffic statistics and online duration on APs.

By default, an AC is disabled from reporting information about STA traffic statistics and online duration on APs.

Format

report-sta-info enable

undo report-sta-info enable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

You can run the report-sta-info enable command to enable an AC to report information about STA traffic statistics and online duration on APs to eSight. After this function is enabled, the AC collects and reports information about STA traffic statistics and online duration on APs to eSight through syslogs when STAs get offline or roam within the AC, which facilitates data query on eSight. The STA traffic statistics include the AC's MAC address, AC name, APs' MAC addresses, AP names, radio IDs, SSID, user names, and STAs' MAC addresses.

Example

# Enable an AC to report information about STA traffic statistics and online duration on APs.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] report-sta-info enable