reset auto-defend attack-source

Function

The reset auto-defend attack-source command clears information about attack sources.

Format

reset auto-defend attack-source [ history ] [ slot slot-id ]

Parameters

Parameter	Description	Value
history	Deletes history attack source information. If history is not specified, all existing attack source information is deleted.	-
slot slot-id	This parameter specifies the slot ID if stacking is not configured. This parameter specifies the stack ID if stacking is enabled. If slot slot-id is not specified, information about attack sources is cleared.	The value must be set according to the device configuration.

Parameter

Description

Value

history

Deletes history attack source information.

If history is not specified, all existing attack source information is deleted.

slot slot-id

This parameter specifies the slot ID if stacking is not configured.
This parameter specifies the stack ID if stacking is enabled.

If slot slot-id is not specified, information about attack sources is cleared.

The value must be set according to the device configuration.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To view the latest attack source information on the device, run the reset auto-defend attack-source command to delete the existing attack source information, wait for a period, and run the display auto-defend attack-source command.

To delete history attack source information, run the reset auto-defend attack-source history command.

Precautions

After the reset auto-defend attack-source command is run, information about attack sources is cleared and cannot be restored.

Example

# Delete existing attack source information on the device.

<HUAWEI> system-view
[HUAWEI] reset auto-defend attack-source