reset cpu-defend statistics

Function

The reset cpu-defend statistics command clears statistics on packets sent to the CPU.

Format

reset cpu-defend statistics [ packet-type packet-type ] [ all | slot slot-id ]

Parameters

Parameter	Description	Value
packet-type packet-type	Specifies the protocol type of packets. packet-type specifies the packet type. If packet-type packet-type is specified, the statistics on the specified type of protocol packets are cleared. If packet-type packet-type is not specified, the statistics on all protocol packets are cleared.	The supported packet type depends on the device.
all	This parameter indicates all switches in a stack if stacking is enabled, or the switch itself if stack is disabled. If all and slot are not specified, the CAR statistics on the master switch in a stack are cleared.	-
slot slot-id	This parameter specifies the slot ID if stacking is not configured. This parameter specifies the stack ID if stacking is enabled.	The value must be set according to the device configuration.

Parameter

Description

Value

packet-type packet-type

Specifies the protocol type of packets. packet-type specifies the packet type.

If packet-type packet-type is specified, the statistics on the specified type of protocol packets are cleared.
If packet-type packet-type is not specified, the statistics on all protocol packets are cleared.

The supported packet type depends on the device.

all

This parameter indicates all switches in a stack if stacking is enabled, or the switch itself if stack is disabled.

If all and slot are not specified, the CAR statistics on the master switch in a stack are cleared.

slot slot-id

This parameter specifies the slot ID if stacking is not configured.
This parameter specifies the stack ID if stacking is enabled.

The value must be set according to the device configuration.

Views

User view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To view statistics on the packets sent to the CPU in a specified period, run the reset cpu-defend statistics command to clear existing statistics and run the display cpu-defend statistics command.

Precautions

The deleted packet statistics cannot be restored.

Example

# Clear statistics on BGP packets sent to the CPU.

<HUAWEI> reset cpu-defend statistics packet-type bgp slot 0