reset deception port-redirect

Function

The reset deception port-redirect command clears information about deceived traffic that scanned unopened TCP ports and stops port deception.

Format

reset deception port-redirect [ source-ip ip-address ] [ destination-ip ip-address ] [ destination-port port ]

Parameters

Parameter	Description	Value
source-ip ip-address	Specifies the source IP address of the deceived traffic.	The value is in dotted decimal notation.
destination-ip ip-address	Specifies the destination IP address of the deceived traffic.	The value is in dotted decimal notation.
destination-port port	Specifies the destination TCP port of the deceived traffic.	The value is an integer in the range from 1 to 65535.

Views

User view

Default Level

3: Management level

Usage Guidelines

If it is found that deceived traffic is normal service traffic based on the display deception port-redirect command, run the reset deception port-redirect command to delete the corresponding entry from the deception flow table to release the traffic.

Example

# Clear information about deceived traffic that scanned unopened TCP ports and stop port deception.

<HUAWEI> reset deception port-redirect