reset dot1x statistics

Function

The reset dot1x statistics command clears 802.1X authentication statistics.

Format

reset dot1x statistics [ interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10> ]

Parameters

Parameter	Description	Value
interface { interface-type interface-number1 [ to interface-number2 ] }	Clears 802.1X authentication statistics on a specified interface. interface-type specifies the interface type. interface-number specifies the interface number. If this parameter is not specified, 802.1X authentication statistics on the device are cleared.	-

Parameter

Description

Value

interface { interface-type interface-number1 [ to interface-number2 ] }

Clears 802.1X authentication statistics on a specified interface.

interface-type specifies the interface type.
interface-number specifies the interface number.

If this parameter is not specified, 802.1X authentication statistics on the device are cleared.

Views

User view

Default Level

3: Management level

Usage Guidelines

The 802.1X authentication statistics contain the number of times that the authentication succeeded and failed on an interface and the number of sent and received packets.

The reset dot1x statistics command is used in the following scenarios:

Redeploy services. After the statistics are cleared, collect the 802.1X authentication statistics again, and run the display dot1x command to check whether the authentication function works properly and whether packets are correctly sent and received.
Rectify a fault. After the fault is rectified, run the reset dot1x statistics command to clear the statistics, collect the statistics on 802.1X authentication again, and then run the display dot1x command to verify the authentication result and check whether packets are correctly sent and received. If the authentication is successful and packets are correctly sent and received, the fault is rectified.

Example

# Clear 802.1X authentication statistics on GE0/0/1.

<HUAWEI> reset dot1x statistics interface gigabitethernet 0/0/1