reset fault-management (upgrade-compatible command)

Function

The reset fault-management command clears all alarm messages.

reset fault-management { active-alarm | event } [ sequence-number sequence-number ]

Parameter	Description	Value
active-alarm	Clears information about active alarms.	-
event	Clears event information.	-
sequence-number sequence-number	Specifies the number of an alarm message.	The value is an integer ranging from 0 to 2147483647. If the value is 0, it indicates that all alarm messages are cleared.

System view

3: Management level

If sequence-number is not specified, the system clears all the alarm messages on the device.

After this command is run, all alarm messages on a device are cleared and cannot be restored.

# Clear all active alarm messages.

<HUAWEI> system-view

[HUAWEI] reset fault-management active-alarm