The reset ipv6 routing-table statistics protocol command clears route statistics in an IPv6 routing table.
reset ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics protocol { all | protocol }
reset ipv6 routing-table all-vpn-instance statistics protocol { all | protocol }
| Parameter | Description | Value |
|---|---|---|
vpn-instance vpn-instance-name |
Specifies the name of an IPv6 VPN instance. |
The value must be an existing VPN instance name. |
all |
Clear route statistics of all routing protocols in an IPv6 routing table. |
- |
protocol |
Clears route statistics of the specified routing protocol in an IPv6 routing table. |
The value may be bgp, direct, isis, ospfv3, ripng, static, or unr. The specific value varies depending on the routing protocol supported by the device. |
all-vpn-instance |
Clears the statistics in the IPv6 routing tables of all VPN instances. |
- |
Usage Scenario
You can use this command to clear route statistics of each routing protocol in an IPv6 routing table. Subsequently, the switch can re-collect route statistics of each routing protocol to monitor route changes and locate network faults.
Precautions
IPv6 route statistics cannot be restored after being cleared. Exercise caution when you use this command.