reset isis suppress-flapping peer

Function

The reset isis suppress-flapping peer command forces an interface to exit from IS-IS neighbor relationship flapping suppression.

reset isis process-id suppress-flapping peer [ interface interface-type interface-number ] [ notify-peer ]

Parameter	Description	Value
process-id	Specifies the ID of an IS-IS process.	The value is an integer ranging from 1 to 65535.
interface interface-type interface-number	Specifies an interface type and number.	-
notify-peer	Instructs neighbors to exit from IS-IS neighbor relationship flapping suppression too.	-

User view

3: Management level

Interfaces exit from flapping suppression in the following scenarios:

The suppression timer expires.
The corresponding IS-IS process is reset.
An IS-IS neighbor is reset using the reset isis peer command.
IS-IS neighbor relationship flapping suppression is disabled globally using the suppress-flapping peer disable (IS-IS) command in the IS-IS view.
The reset isis suppress-flapping peer command is run.
Suppression is aborted forcibly using the reset isis suppress-flapping peer [ interface-type interface-number ] notify-peer command on the remote device.

# Force interfaces to exit from IS-IS neighbor relationship flapping suppression.

<HUAWEI> reset isis 1 suppress-flapping peer