reset mac-authen statistics

Function

The reset mac-authen statistics command clears MAC address authentication statistics.

reset mac-authen statistics [ interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10> ]

Parameter	Description	Value
interface { interface-type interface-number1 [ to interface-number2 ] }	Clears MAC address authentication statistics on a specified interface. interface-type specifies the interface type. interface-number specifies the interface number. If this parameter is not specified, MAC address authentication statistics on the device are cleared.	-

Parameter

Description

Value

interface { interface-type interface-number1 [ to interface-number2 ] }

Clears MAC address authentication statistics on a specified interface.

If this parameter is not specified, MAC address authentication statistics on the device are cleared.

User view

3: Management level

The reset mac-authen statistics command is used in the following scenarios:

Re-deploy services. After the statistics are cleared, collect the MAC address authentication statistics again, and run the display mac-authen command to check whether the authentication function is normal.
Rectify a fault. After the fault is rectified, run the reset mac-authen statistics command to clear statistics, collect MAC address authentication statistics again, and run the display mac-authen command to check the authentication result. If the authentication is successful, the fault is rectified.

# Clear MAC address authentication statistics.

<HUAWEI> reset mac-authen statistics