reset mpls te auto-frr

Function

The reset mpls te auto-frr command resets a specified auto bypass tunnel.

After the Auto FRR function is enabled, you can use this command to recreate a bypass tunnel.

reset mpls te auto-frr { lsp-id ingress-lsr-id tunnel-id | name bypass-tunnel-name }

Parameter	Description	Value
lsp-id	Specifies the ID of a LSP.	-
ingress-lsr-id	Specifies the LSR ID of the ingress.	In dotted decimal notation.
tunnel-id	Specifies the ID of a tunnel.	The value is an integer and its ranges from 0 to 65535.
name bypass-tunnel-name	Specifies the name of a bypass tunnel.	The value is a string of 1 to 63 characters.

User view

3: Management level

To immediately recreate a specified auto bypass tunnel, run the reset mpls te auto-frr command.

# Reset the bypass tunnel with the ingress address being 1.1.1.1 and the tunnel ID being 10.

<HUAWEI> reset mpls te auto-frr lsp-id 1.1.1.1 10