reset msdp sa-cache

Function

The reset msdp sa-cache command clears (S, G) entries in the SA cache.

reset msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-address ]

Parameter	Description	Value
vpn-instance vpn-instance-name	Specifies a VPN instance. vpn-instance-name specifies the name of the VPN instance.	The value must be an existing VPN instance name.
all-instance	Indicates all the instances. If vpn-instance or all-instance is not specified, only the entries in the SA cache of the public network instance are cleared.	-
group-address	Specifies the group address carried in (S, G) information. If this parameter is not specified, all (S, G) information in the SA cache is cleared.	The value ranges from 224.0.1.0 to 239.255.255.255, in dotted decimal notation.

User view

3: Management level

Usage Scenario

To clear (S, G) information from an SA cache, run the reset msdp sa-cache command.

Configuration Impact

(S, G) information in the SA cache cannot be restored after you clear it. Therefore, confirm the action before you use this command.

# Clear the (S, G) entries with the group address of 225.5.4.3 in the SA cache.

<HUAWEI> reset msdp sa-cache 225.5.4.3