The reset multicast-domain control-message counters command clears statistics about sent and received MDT switch messages in a specified VPN instance or all VPN instances.
reset multicast-domain { vpn-instance vpn-instance-name | all-instance } control-message counters
| Parameter | Description | Value |
|---|---|---|
| vpn-instance vpn-instance-name | Clears statistics about sent and received MDT switch messages in a specified VPN instance. The parameter vpn-instance-name specifies the name of an existing VPN instance on the device. | The value must be an existing VPN instance name. |
| all-instance | Clears statistics about sent and received MDT switch messages in all VPN instances. | - |
Usage Scenario
If a fault occurs on a multicast VPN network, you need to check whether MDT switch messages are properly sent and received. If the current device already records a large number of statistics about MDT switch messages, you can run the reset multicast-domain control-message counters command to clear statistics about sent and received messages in a specified VPN instance or all VPN instances and then run the display multicast-domain control-message counters command to check whether the count of MDT switch messages increases, which helps fault location.
Precautions
Running the reset multicast-domain control-message counters command will clear all statistics about MDT switch messages. Therefore, exercise caution before using this command.