The reset pim control-message counters command resets the statistics about PIM Control messages.
reset pim [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ interface interface-type interface-number ]
| Parameter | Description | Value |
|---|---|---|
| vpn-instance vpn-instance-name | Specifies a VPN instance. vpn-instance-name specifies the name of the VPN instance. | The value must be an existing VPN instance name. |
| all-instance | Specifies all the instances. | - |
| interface interface-type interface-number | Specifies the name and the number of an interface. It is used to reset the statistics about PIM control messages on a specified interface. | - |
Usage Scenario
If a PIM-enabled interface on the switch has been forwarding multicast packets for a long period of time, the switch stores statistics on a large number of control messages. You can run this command to reset statistics on control messages.
# Reset the statistics about PIM control messages on all interfaces in the public network instance.
<HUAWEI> reset pim control-message counters
<HUAWEI> reset pim control-message counters interface vlanif 100