reset pm current-data

Function

The reset pm current-data command deletes the collected performance statistics.

Format

reset pm current-data [ instance-type instance-type [ measure measure-name | instance instance-name &<1-5> ] ^* ]

Parameters

Parameter	Description	Value
instance-type instance-type	Deletes the performance statistics about instances of a specified type. If instance-type instance-type is not specified, the system deletes the performance statistics about instances of all types.	The enumerated values include: ipfpm: collects IP FPM statistics. uni-mng-as-port: collects statistics on an AS port. wlan-ap: collects AP statistics: wlan-radio: collects statistics about a specified AP radio. wlan-ssid: collects statistics about a service set bound to a specific AP radio. wlan-ap-wiredport: collects statistics on an AP wired port. NOTE: The S6720-SI and S6720S-SI only support the uni-mng-as-port.
measure measure-name	Deletes the performance statistics about a specified counter.	The value is a string of 1 to 63 case-insensitive characters without spaces. Select statistics counters according to the device configuration.
instance instance-name	Deletes the performance statistics about a specified instance.	The value is a string of 1 to 255 case-insensitive characters. When instance-type is ipfpm, the instance-name value is configured using the instance (IPFPM-MCP view) command. When instance-type is uni-mng-as-port, the instance-name value is AS name+interface number, for example, as1 gigabitethernet0/0/1. When instance-type is wlan-ap, the instance-name value is ap-id. For example, 1 indicates AP 1. When instance-type is wlan-radio, the instance-name value is ap-id.radio-id. For example, 0.1 indicates radio 1 of AP 0. When instance-type is wlan-ssid, the instance-name value is ap-id.radio-id.SSID name length.SSID name ASCII code. For example, 1.0.5.98.99.100.101.102 indicates the SSID with the name bcdef and name length 5 of radio 0 of AP 1. When instance-type is wlan-ap-wiredport, the instance-name value is ap-id.port type x 100+port number. For example, 0.101 indicates FE port 1 of AP 0. The port type can be 1 (an FE port) or 2 (a GE port). The port number ranges from 0 to 99.

Parameter

Description

Value

instance-type instance-type

Deletes the performance statistics about instances of a specified type.

If instance-type instance-type is not specified, the system deletes the performance statistics about instances of all types.

The enumerated values include:

ipfpm: collects IP FPM statistics.
uni-mng-as-port: collects statistics on an AS port.
wlan-ap: collects AP statistics:
wlan-radio: collects statistics about a specified AP radio.
wlan-ssid: collects statistics about a service set bound to a specific AP radio.
wlan-ap-wiredport: collects statistics on an AP wired port.

NOTE:

The S6720-SI and S6720S-SI only support the uni-mng-as-port.

measure measure-name

Deletes the performance statistics about a specified counter.

The value is a string of 1 to 63 case-insensitive characters without spaces. Select statistics counters according to the device configuration.

instance instance-name

Deletes the performance statistics about a specified instance.

The value is a string of 1 to 255 case-insensitive characters.

When instance-type is ipfpm, the instance-name value is configured using the instance (IPFPM-MCP view) command.
When instance-type is uni-mng-as-port, the instance-name value is AS name+interface number, for example, as1 gigabitethernet0/0/1.
When instance-type is wlan-ap, the instance-name value is ap-id. For example, 1 indicates AP 1.
When instance-type is wlan-radio, the instance-name value is ap-id.radio-id. For example, 0.1 indicates radio 1 of AP 0.
When instance-type is wlan-ssid, the instance-name value is ap-id.radio-id.SSID name length.SSID name ASCII code. For example, 1.0.5.98.99.100.101.102 indicates the SSID with the name bcdef and name length 5 of radio 0 of AP 1.
When instance-type is wlan-ap-wiredport, the instance-name value is ap-id.port type x 100+port number. For example, 0.101 indicates FE port 1 of AP 0. The port type can be 1 (an FE port) or 2 (a GE port). The port number ranges from 0 to 99.

Views

Performance statistics collection task view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To delete the collected performance statistics and collect new performance statistics, run the reset pm current-data command.

Precautions

Performance statistics cannot be restored after being deleted. Confirm your action before using this command.

Example

# Delete the collected performance statistics.

<HUAWEI> system-view
[HUAWEI] pm
[HUAWEI-pm] statistics-task task1
[HUAWEI-pm-statistics-task1] reset pm current-data