reset poe slot

Function

The reset poe slot command resets the PoE chip in a specified slot.

Only the S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S5735-S-I, and S5735-S support this command.

Format

reset poe { all chips | chip chip-id } slot slot-id

Parameters

Parameter	Description	Value
all chips	Specifies all PoE chips.	-
chip chip-id	Specifies a chip ID.	The value must be set according to the device configuration.
slot-id	Specifies a slot ID.	The value must be set according to the device configuration.

Views

User view

Default Level

3: Management level

Usage Guidelines

If one or multiple PoE chips of a PSE are suspended, the port connected to a PD cannot detect the suspension and fails power the PD. In this case, you can run the reset poe { all chips | chip chip-id } slot slot-id command to reset the PoE chip.

Example

# Reset PoE chip 0 in slot 1.

<HUAWEI> reset poe chip 0 slot 1
Warning: This command will cause power cycling for the PD connected to port 1,2,3,4. Continue? [Y/N]:y    
Info: It will take a few seconds. Please wait...
Info: Success to reset the chip.