reset rrpp statistics

Function

The reset rrpp statistics command clears statistics on all RRPP packets.

Format

reset rrpp statistics domain domain-id [ ring ring-id ]

Parameters

Parameter	Description	Value
domain domain-id	Specifies the ID of an RRPP domain.	The value is an integer that ranges from 1 to 64.
ring ring-id	Specifies the ID of an RRPP ring. If ring-id is specified, statistics on RRPP packets on the primary and secondary interfaces of the specified ring in the domain of the switch are cleared. If ring-id is not specified, statistics on all the RRPP packets on the RRPP interfaces of all rings are cleared.	The value is an integer that ranges from 1 to 64.

Parameter

Description

Value

domain domain-id

Specifies the ID of an RRPP domain.

The value is an integer that ranges from 1 to 64.

ring ring-id

Specifies the ID of an RRPP ring.

If ring-id is specified, statistics on RRPP packets on the primary and secondary interfaces of the specified ring in the domain of the switch are cleared. If ring-id is not specified, statistics on all the RRPP packets on the RRPP interfaces of all rings are cleared.

The value is an integer that ranges from 1 to 64.

Views

User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

This command clears statistics on all the RRPP packets so that you can collect new statistics to analyze the network.

Precautions

The statistics on RRPP packets cannot be restored after you clear them. Exercise caution before you run the command.

Example

# Clear the statistics on RRPP packets on Ring 1 in Domain 1.

<HUAWEI> reset rrpp statistics domain 1 ring 1

# Clear the statistics on RRPP packets all the rings in Domain 1.

<HUAWEI> reset rrpp statistics domain 1