reset stack configuration

Function

The reset stack configuration command clears all stack configuration. That is, this command restores the default stack configuration.

Format

reset stack configuration

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The cleared stack configuration includes: switch slot ID, stack priority, stack reserved VLAN, stack MAC address switching delay, stack port configuration, and stack port rate configuration. For example, when switches are stacked using dedicated stack cables, to ensure that slot IDs are automatically generated for the switches based on the sequence in which dedicated stack cables are connected, run the reset stack configuration command to clear all stack configuration.

Precautions

Running this command will cause the stack to split and member switches to restart.

Example

# Clear all stack configuration.

<HUAWEI> system-view
[HUAWEI] reset stack configuration
Warning: This operation will clear all stack configurations and may lead to the loss of the slot ID configuration and cause the device to reset immediately. Are you sure you want to continue? [Y/N]:y